Codey OnlineArduino- & ESP32-Komponentenbibliothek › DS3231 Real Time Clock Module I2C
DS3231 Real Time Clock Module I2C
Sensoren

DS3231 Real Time Clock Module I2C

Echtzeit-Uhrenmodul mit DS3231-Chip und I2C

Breite: 46.2 mm

Pinbelegung — DS3231 Real Time Clock Module I2C

Pin Signal Beschreibung
32K clock 32.768 kHz clock output from the DS3231 RTC for external timing use.
SQW interrupt RTC square-wave or active-low alarm interrupt output from the DS3231.
SCL SCL I2C serial clock line for communication with the DS3231 RTC.
SDA SDA I2C serial data line for communication with the DS3231 RTC.
VCC power Main power input for the RTC module, typically 3.3 V to 5 V.
GND ground Ground reference for power and I2C signals.
SCL.1 SCL Duplicate I2C serial clock connection for the DS3231 RTC.
SDA.1 SDA Duplicate I2C serial data connection for the DS3231 RTC.
VCC.1 power Duplicate main power input for the RTC module, typically 3.3 V to 5 V.
GND.1 ground Duplicate ground reference for power and I2C signals.

Beispielschaltplan — DS3231 Real Time Clock Module I2C

Von Nach Kabel
board:5V x1:VCC red
board:GND x1:GND black
board:SCL x1:SCL green
board:SDA x1:SDA blue

Arduino-Beispielcode — DS3231 Real Time Clock Module I2C

Dieses Beispiel wurde für das arduino-uno geschrieben und kompiliergeprüft. Codey Online passt es für jedes andere unterstützte Board an.

#include <Wire.h>
#include <RTClib.h>

RTC_DS3231 rtc;

void setup() {
  Serial.begin(9600);
  while (!Serial) {
    ;
  }

  Wire.begin();

  if (!rtc.begin()) {
    Serial.println("Couldn't find DS3231 RTC module");
    while (1) {
      delay(10);
    }
  }

  // If the RTC lost power, set it to the compile time.
  if (rtc.lostPower()) {
    Serial.println("RTC lost power, setting the time to compile time.");
    rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
  }

  Serial.println("DS3231 RTC example started.");
}

void loop() {
  DateTime now = rtc.now();

  Serial.print("Date: ");
  Serial.print(now.year());
  Serial.print('-');
  if (now.month() < 10) Serial.print('0');
  Serial.print(now.month());
  Serial.print('-');
  if (now.day() < 10) Serial.print('0');
  Serial.print(now.day());

  Serial.print("  Time: ");
  if (now.hour() < 10) Serial.print('0');
  Serial.print(now.hour());
  Serial.print(':');
  if (now.minute() < 10) Serial.print('0');
  Serial.print(now.minute());
  Serial.print(':');
  if (now.second() < 10) Serial.print('0');
  Serial.println(now.second());

  delay(1000);
}

Ähnliche Komponenten

18650 Battery Shield with USB-C Charger and 5V Boost Converter

18650 Battery Shield with USB-C Charger and 5V Boost Converter

2.4 inch OLED Display I2C 3.3V

2.4 inch OLED Display I2C 3.3V

3.5 inch TFT LCD Shield

3.5 inch TFT LCD Shield

50kg Load Cell Weight Sensor

50kg Load Cell Weight Sensor

Bau dein Arduino- oder ESP32-Projekt mit AI

Beschreib einfach, was du bauen willst. Codey Online schreibt den Code, zeichnet den Schaltplan, kompiliert alles und flasht dein Board direkt aus dem Browser.

Kostenlos starten