L’ADS7830 è un convertitore analogico-digitale a 8 canali e 8 bit, progettato per leggere più ingressi analogici tramite un’interfaccia I2C. Si usa spesso con microcontrollori come Arduino e ESP32 per acquisire sensori, potenziometri o altri segnali analogici con un cablaggio minimo.
| Pin | Segnale | Descrizione |
|---|---|---|
VIN |
power | Module supply input for the ADS7830 board, typically 3.3V or 5V. |
GND |
ground | Ground reference for power, I2C, and analog input measurements. |
SCL |
SCL | I2C clock line from the microcontroller to the ADS7830. |
SDA |
SDA | I2C data line for commands and ADC conversion results. |
REF |
reference | ADC reference voltage input that sets the conversion full-scale range. |
COM |
analog | Common analog input/reference node used for ADS7830 input modes. |
AD0 |
digital | I2C address select pin; tie high or low to choose the device address. |
AD1 |
digital | I2C address select pin; tie high or low to choose the device address. |
A7 |
analog | Analog input channel 7 for voltage measurement by the ADS7830. |
A6 |
analog | Analog input channel 6 for voltage measurement by the ADS7830. |
A5 |
analog | Analog input channel 5 for voltage measurement by the ADS7830. |
A4 |
analog | Analog input channel 4 for voltage measurement by the ADS7830. |
A3 |
analog | Analog input channel 3 for voltage measurement by the ADS7830. |
A2 |
analog | Analog input channel 2 for voltage measurement by the ADS7830. |
A1 |
analog | Analog input channel 1 for voltage measurement by the ADS7830. |
A0 |
analog | Analog input channel 0 for voltage measurement by the ADS7830. |
Descrivi cosa vuoi realizzare. Codey Online scrive il codice, disegna lo schema di collegamento, lo compila e programma la tua scheda direttamente dal browser.
Inizia gratis
