De ADS7830 is een 8-kanaals 8-bits analoog-naar-digitaalomzetter om meerdere analoge ingangen via een I2C-interface uit te lezen. Hij wordt vaak gebruikt met microcontrollers zoals Arduino en ESP32 om sensoren, potentiometers of andere analoge signalen met minimale bedrading te meten.
| Pin | Signaal | Beschrijving |
|---|---|---|
VIN |
power | Module supply input for the ADS7830 board, typically 3.3V or 5V. |
GND |
ground | Ground reference for power, I2C, and analog input measurements. |
SCL |
SCL | I2C clock line from the microcontroller to the ADS7830. |
SDA |
SDA | I2C data line for commands and ADC conversion results. |
REF |
reference | ADC reference voltage input that sets the conversion full-scale range. |
COM |
analog | Common analog input/reference node used for ADS7830 input modes. |
AD0 |
digital | I2C address select pin; tie high or low to choose the device address. |
AD1 |
digital | I2C address select pin; tie high or low to choose the device address. |
A7 |
analog | Analog input channel 7 for voltage measurement by the ADS7830. |
A6 |
analog | Analog input channel 6 for voltage measurement by the ADS7830. |
A5 |
analog | Analog input channel 5 for voltage measurement by the ADS7830. |
A4 |
analog | Analog input channel 4 for voltage measurement by the ADS7830. |
A3 |
analog | Analog input channel 3 for voltage measurement by the ADS7830. |
A2 |
analog | Analog input channel 2 for voltage measurement by the ADS7830. |
A1 |
analog | Analog input channel 1 for voltage measurement by the ADS7830. |
A0 |
analog | Analog input channel 0 for voltage measurement by the ADS7830. |
Beschrijf wat je wilt bouwen. Codey Online schrijft de code, tekent het aansluitschema, compileert het en flasht je board rechtstreeks vanuit de browser.
Gratis starten
