Der ESP8266 D1 Mini Pro ist ein kompaktes Mikrocontroller-Developmentboard mit WiFi, das häufig für IoT-Prototypen verwendet wird. Es bietet GPIO für UART (TX/RX), I2C (SDA/SCL) und SPI (SCK/MISO/MOSI/SS) sowie einen Analogeingang (A0) und einen Reset-Pin (RST). Typische Anschlüsse sind die Versorgung des Boards über 3,3V und GND als Bezugspotential.
| Pin | Signal | Beschreibung |
|---|---|---|
RST |
reset | Active-low reset input for the ESP8266; pull low to restart the module. |
A0 |
analog | Analog ADC input; reads a variable voltage through the board's input divider. |
D0 |
digital | ESP8266 GPIO16; usable digital I/O and deep-sleep wake input. |
D5 |
SCK | ESP8266 GPIO14; common SPI SCK clock pin and general digital I/O. |
D6 |
MISO | ESP8266 GPIO12; common SPI MISO input and general digital I/O. |
D7 |
MOSI | ESP8266 GPIO13; common SPI MOSI output and general digital I/O. |
D8 |
SS | ESP8266 GPIO15; common SPI chip-select, boot strap pin, and digital I/O. |
3V3 |
power | Regulated 3.3 V supply rail for the ESP8266 and low-current external circuits. |
TX |
TX | UART transmit output from the ESP8266 for serial programming and debugging. |
RX |
RX | UART receive input to the ESP8266 for serial programming and communication. |
D1 |
SCL | ESP8266 GPIO5; commonly used as I2C SCL clock and general digital I/O. |
D2 |
SDA | ESP8266 GPIO4; commonly used as I2C SDA data and general digital I/O. |
D3 |
digital | ESP8266 GPIO0; boot strap pin and general digital I/O, affects flashing mode. |
D4 |
digital | ESP8266 GPIO2; boot strap pin, often connected to the onboard LED. |
GND |
ground | Ground reference for power and all logic signals. |
5V |
power | 5 V input/output rail, typically from USB or external supply to the regulator. |
Beschreib einfach, was du bauen willst. Codey Online schreibt den Code, zeichnet den Schaltplan, kompiliert alles und flasht dein Board direkt aus dem Browser.
Kostenlos starten