Wi-Fi, Bluetooth and IoT without the boilerplate. Describe your ESP32 project and Codey Online writes the firmware, sorts out the libraries and flashes the board.
The ESP32 is the go-to board for connected projects, but Wi-Fi and BLE code is full of boilerplate. Codey Online writes it for you: ask for a "web page that shows sensor readings" or an "MQTT client that publishes temperature" and get complete, working ESP32 firmware with the right libraries already included.
Codey compiles your ESP32 sketch in the cloud and flashes it over USB from the browser - no esptool, no board manager, no driver setup. It supports ESP32-WROOM, ESP32-S3 and ESP32-C3, and warns about 3.3V wiring so your hardware stays safe.
Connected projects from prompt to flashed board.
Describe the connectivity you need and Codey writes the networking code with the correct libraries.
ESP32-WROOM, S3 and C3 each behave differently; the AI targets the right one for your build.
Upload firmware over USB straight from Chrome or Edge - no command-line tools to install.
Describe what you want to build. Codey Online writes the code, draws the wiring diagram, compiles it and flashes your board straight from the browser.
Start for free