Codey OnlineCartes Arduino & ESP32 prises en charge › ESP32-CAM
ESP32-CAM
Esp32 Family

ESP32-CAM

L’ESP32-CAM est une carte de développement compacte basée sur l’ESP32, avec un module caméra pour des projets IoT. Elle utilise le SoC Wi‑Fi ESP32 pour capturer des images et, en général, servir une interface web simple et diffuser des images en continu sur un réseau. La programmation se fait généralement via une interface de bootloader série avec Arduino IDE ou ESP-IDF, la caméra étant reliée à l’ESP32 par le circuit caméra embarqué.

Cible de compilation (FQBN): esp32:esp32:esp32cam Brochage: 16

Brochage — ESP32-CAM

Broche Signal Description
5V power 5 V power input for the ESP32-CAM board regulator.
GND ground Ground reference for power and all logic signals.
IO12 digital ESP32 GPIO12; usable digital I/O, also a boot strapping pin.
IO13 digital ESP32 GPIO13; usable digital I/O, often available after camera setup.
IO15 digital ESP32 GPIO15; usable digital I/O, also a boot strapping pin.
IO14 digital ESP32 GPIO14; usable digital I/O, commonly used as HSPI clock if needed.
IO2 digital ESP32 GPIO2; digital I/O and boot strapping pin, keep state valid at reset.
IO4 digital ESP32 GPIO4; digital I/O, commonly connected to the onboard flash LED.
3V3 power 3.3 V rail for ESP32 logic; use only for low-current external loads.
IO16 digital ESP32 GPIO16; usable digital I/O, limited by board/camera resource use.
IO0 digital Boot mode pin; pull low during reset to enter serial flashing mode.
GND.1 ground Ground reference for power and serial/programming connections.
VCC power Board supply pin, typically used as a 5 V/VCC power rail depending on module wiring.
U0R RX UART0 receive input for serial programming and console; connect to USB-serial TX.
U0T TX UART0 transmit output for serial programming and console; connect to USB-serial RX.
GND.2 ground Ground reference pin near UART header for programming and external circuits.

Construisez votre projet Arduino ou ESP32 avec l'IA

Décrivez ce que vous voulez créer. Codey Online écrit le code, dessine le schéma de câblage, le compile et flashe votre carte directement depuis le navigateur.

Commencez gratuitement