Codey Online › Ondersteunde Arduino- & ESP32-boards › ESP32-S3 N16R18 Camera Module
ESP32-S3 N16R18 Camera Module
Esp32 Family

ESP32-S3 N16R18 Camera Module

De ESP32-S3 N16R8 Camera Module is een op ESP32 gebaseerd development board met een geïntegreerde cameraconnector, vaak gebruikt voor Wi‑Fi-vision- en IoT-projecten. N16R8 betekent meestal 16 MB flash en 8 MB PSRAM, waardoor hij geschikt is voor beeldopname, streaming en eenvoudige computer vision-taken.

Compile-target (FQBN): esp32:esp32:esp32s3 Pinout: 40

Pinout — ESP32-S3 N16R18 Camera Module

Pin Signaal Beschrijving
5V power 5 V supply rail from USB or external 5 V input for powering the board.
GPIO14 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO13 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO12 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO11 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO10 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO9 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO46 digital ESP32-S3 GPIO46 strapping-capable 3.3 V digital I/O; use with care at boot.
GPIO3 analog ESP32-S3 RTC-capable 3.3 V GPIO; can be used as digital I/O or ADC input.
GPIO8 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO18 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO17 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO16 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO15 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO7 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO6 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO5 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO4 analog ESP32-S3 RTC-capable 3.3 V GPIO; can be used as digital I/O or ADC input.
EN enable Chip enable/reset input; pull low to reset the ESP32-S3, high to run.
3V3 power Regulated 3.3 V rail for the ESP32-S3 and low-power external circuits.
GND ground Ground reference for power and all 3.3 V logic signals.
GPIO19 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO20 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO21 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO47 digital ESP32-S3 GPIO47 strapping-capable 3.3 V digital I/O; use with care at boot.
GPIO48 data ESP32-S3 GPIO48, often used for onboard RGB LED data; also usable as digital I/O.
GPIO45 digital ESP32-S3 strapping-capable 3.3 V digital I/O; avoid forcing wrong level during boot.
GPIO0 digital Boot-mode strap pin; hold low during reset to enter serial download mode.
GPIO35 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO36 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO37 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO38 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO39 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO40 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO41 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO42 digital ESP32-S3 general-purpose 3.3 V digital I/O; usable for PWM or peripheral signals.
GPIO2 analog ESP32-S3 RTC-capable 3.3 V GPIO; can be used as digital I/O or ADC input.
GPIO1 analog ESP32-S3 RTC-capable 3.3 V GPIO; can be used as digital I/O or ADC input.
RX RX UART receive input for serial programming/debug; 3.3 V logic level.
TX TX UART transmit output for serial programming/debug; 3.3 V logic level.

Bouw je Arduino- of ESP32-project met AI

Beschrijf wat je wilt bouwen. Codey Online schrijft de code, tekent het aansluitschema, compileert het en flasht je board rechtstreeks vanuit de browser.

Gratis starten