Codey OnlineBibliothèque de composants Arduino & ESP32 › DS3231 Real Time Clock Module I2C
DS3231 Real Time Clock Module I2C
Capteurs

DS3231 Real Time Clock Module I2C

Module d'horloge temps réel avec puce DS3231 et I2C

Largeur: 46.2 mm

Brochage — DS3231 Real Time Clock Module I2C

Broche Signal Description
32K clock 32.768 kHz clock output from the DS3231 RTC for external timing use.
SQW interrupt RTC square-wave or active-low alarm interrupt output from the DS3231.
SCL SCL I2C serial clock line for communication with the DS3231 RTC.
SDA SDA I2C serial data line for communication with the DS3231 RTC.
VCC power Main power input for the RTC module, typically 3.3 V to 5 V.
GND ground Ground reference for power and I2C signals.
SCL.1 SCL Duplicate I2C serial clock connection for the DS3231 RTC.
SDA.1 SDA Duplicate I2C serial data connection for the DS3231 RTC.
VCC.1 power Duplicate main power input for the RTC module, typically 3.3 V to 5 V.
GND.1 ground Duplicate ground reference for power and I2C signals.

Exemple de schéma de câblage — DS3231 Real Time Clock Module I2C

De Vers Fil
board:5V x1:VCC red
board:GND x1:GND black
board:SCL x1:SCL green
board:SDA x1:SDA blue

Exemple de code Arduino — DS3231 Real Time Clock Module I2C

Cet exemple a été écrit et vérifié à la compilation pour le arduino-uno. Codey Online l'adapte pour vous à toute autre carte prise en charge.

#include <Wire.h>
#include <RTClib.h>

RTC_DS3231 rtc;

void setup() {
  Serial.begin(9600);
  while (!Serial) {
    ;
  }

  Wire.begin();

  if (!rtc.begin()) {
    Serial.println("Couldn't find DS3231 RTC module");
    while (1) {
      delay(10);
    }
  }

  // If the RTC lost power, set it to the compile time.
  if (rtc.lostPower()) {
    Serial.println("RTC lost power, setting the time to compile time.");
    rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
  }

  Serial.println("DS3231 RTC example started.");
}

void loop() {
  DateTime now = rtc.now();

  Serial.print("Date: ");
  Serial.print(now.year());
  Serial.print('-');
  if (now.month() < 10) Serial.print('0');
  Serial.print(now.month());
  Serial.print('-');
  if (now.day() < 10) Serial.print('0');
  Serial.print(now.day());

  Serial.print("  Time: ");
  if (now.hour() < 10) Serial.print('0');
  Serial.print(now.hour());
  Serial.print(':');
  if (now.minute() < 10) Serial.print('0');
  Serial.print(now.minute());
  Serial.print(':');
  if (now.second() < 10) Serial.print('0');
  Serial.println(now.second());

  delay(1000);
}

Composants similaires

18650 Battery Shield with USB-C Charger and 5V Boost Converter

18650 Battery Shield with USB-C Charger and 5V Boost Converter

2.4 inch OLED Display I2C 3.3V

2.4 inch OLED Display I2C 3.3V

3.5 inch TFT LCD Shield

3.5 inch TFT LCD Shield

50kg Load Cell Weight Sensor

50kg Load Cell Weight Sensor

Construisez votre projet Arduino ou ESP32 avec l'IA

Décrivez ce que vous voulez créer. Codey Online écrit le code, dessine le schéma de câblage, le compile et flashe votre carte directement depuis le navigateur.

Commencez gratuitement