Codey OnlineArduino- & ESP32-componentenbibliotheek › DS3231 Real Time Clock Module I2C
DS3231 Real Time Clock Module I2C
Sensoren

DS3231 Real Time Clock Module I2C

Real-time klokmodule met DS3231-chip en I2C

Breedte: 46.2 mm

Pinout — DS3231 Real Time Clock Module I2C

Pin Signaal Beschrijving
32K clock 32.768 kHz clock output from the DS3231 RTC for external timing use.
SQW interrupt RTC square-wave or active-low alarm interrupt output from the DS3231.
SCL SCL I2C serial clock line for communication with the DS3231 RTC.
SDA SDA I2C serial data line for communication with the DS3231 RTC.
VCC power Main power input for the RTC module, typically 3.3 V to 5 V.
GND ground Ground reference for power and I2C signals.
SCL.1 SCL Duplicate I2C serial clock connection for the DS3231 RTC.
SDA.1 SDA Duplicate I2C serial data connection for the DS3231 RTC.
VCC.1 power Duplicate main power input for the RTC module, typically 3.3 V to 5 V.
GND.1 ground Duplicate ground reference for power and I2C signals.

Voorbeeld-aansluitschema — DS3231 Real Time Clock Module I2C

Van Naar Draad
board:5V x1:VCC red
board:GND x1:GND black
board:SCL x1:SCL green
board:SDA x1:SDA blue

Voorbeeld-Arduinocode — DS3231 Real Time Clock Module I2C

Dit voorbeeld is geschreven en compile-gecheckt voor de arduino-uno. Codey Online past het voor je aan naar elk ander ondersteund board.

#include <Wire.h>
#include <RTClib.h>

RTC_DS3231 rtc;

void setup() {
  Serial.begin(9600);
  while (!Serial) {
    ;
  }

  Wire.begin();

  if (!rtc.begin()) {
    Serial.println("Couldn't find DS3231 RTC module");
    while (1) {
      delay(10);
    }
  }

  // If the RTC lost power, set it to the compile time.
  if (rtc.lostPower()) {
    Serial.println("RTC lost power, setting the time to compile time.");
    rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
  }

  Serial.println("DS3231 RTC example started.");
}

void loop() {
  DateTime now = rtc.now();

  Serial.print("Date: ");
  Serial.print(now.year());
  Serial.print('-');
  if (now.month() < 10) Serial.print('0');
  Serial.print(now.month());
  Serial.print('-');
  if (now.day() < 10) Serial.print('0');
  Serial.print(now.day());

  Serial.print("  Time: ");
  if (now.hour() < 10) Serial.print('0');
  Serial.print(now.hour());
  Serial.print(':');
  if (now.minute() < 10) Serial.print('0');
  Serial.print(now.minute());
  Serial.print(':');
  if (now.second() < 10) Serial.print('0');
  Serial.println(now.second());

  delay(1000);
}

Vergelijkbare componenten

18650 Battery Shield with USB-C Charger and 5V Boost Converter

18650 Battery Shield with USB-C Charger and 5V Boost Converter

2.4 inch OLED Display I2C 3.3V

2.4 inch OLED Display I2C 3.3V

3.5 inch TFT LCD Shield

3.5 inch TFT LCD Shield

50kg Load Cell Weight Sensor

50kg Load Cell Weight Sensor

Bouw je Arduino- of ESP32-project met AI

Beschrijf wat je wilt bouwen. Codey Online schrijft de code, tekent het aansluitschema, compileert het en flasht je board rechtstreeks vanuit de browser.

Gratis starten